GA-8GPNXP Duo Motherboard - 38 -
English
Onboard H/W LAN1
Enabled Enable Onboard H/W LAN1 function. (Default value)
Disabled Disable this function.
Onboard H/W LAN2
Enabled Enable Onboard H/W LAN2 function. (Default value)
Disabled Disable this function.
Onboard LAN1 Boot ROM
This function decide whether to invoke the boot ROM of the onboard LAN1 chip.
Enabled Enable this function.
Disabled Disable this function. (Default value)
Onboard LAN2 Boot ROM
This function decide whether to invoke the boot ROM of the onboard LAN2 chip.
Enabled Enable this function.
Disabled Disable this function. (Default value)
Onboard Serial Port 1
Auto BIOS will automatically setup the port 1 address.
3F8/IRQ4 Enable onboard Serial port 1 and address is 3F8. (Default value)
2F8/IRQ3 Enable onboard Serial port 1 and address is 2F8.
3E8/IRQ4 Enable onboard Serial port 1 and address is 3E8.
2E8/IRQ3 Enable onboard Serial port 1 and address is 2E8.
Disabled Disable onboard Serial port 1.
Onboard IrDA Port
Auto BIOS will automatically setup the IrDA port address.
3F8/IRQ4 Enable onboard IrDA port and address is 3F8/IRQ4.
2F8/IRQ3 Enable onboard IrDA port and address is 2F8/IRQ3. (Default value)
3E8/IRQ4 Enable onboard IrDA port and address is 3E8/IRQ4.
2E8/IRQ3 Enable onboard IrDA port and address is 2E8/IRQ3.
Disabled Disable onboard IrDA port .
UART Mode Select
This item allows you to determine which Infra Red(IR) function of Onboard I/O chip.
ASKIR Set onboard I/O chip UART to ASKIR Mode.
IrDA Set onboard I/O chip UART to IrDA Mode. (Default value)
UR2 Duplex Mode
This feature allows you to seclect IR mode.
Half IR Function Duplex Half. (Default value)
Full IR Function Duplex Full.
Onboard Parallel port
Disabled Disable onboard LPT port.
378/IRQ7 Enable onboard LPT port and address is 378/IRQ7. (Default value)
278/IRQ5 Enable onboard LPT port and address is 278/IRQ5.
3BC/IRQ7 Enable onboard LPT port and address is 3BC/IRQ7.