Gigabyte GA-8VM533 - Onboard Serial Port 1; Onboard Parallel Port; Parallel Port Mode

BIOS Setup
- 37 -
English
USB Mouse Support
Enabled Enable USB Mouse Support.
Disabled Disable USB Mouse Support. (Default value)
Onboard Serial Port 1
Auto BIOS will automatically setup the port 1 address.
3F8/IRQ4 Enable onboard Serial port 1 and address is 3F8,Using IRQ4. (Default value)
2F8/IRQ3 Enable onboard Serial port 1 and address is 2F8,Using IRQ3.
3E8/IRQ4 Enable onboard Serial port 1 and address is 3E8,Using IRQ4.
2E8/IRQ3 Enable onboard Serial port 1 and address is 2E8,Using IRQ3.
Disabled Disable onboard Serial port 1.
OnBoard Parallel port
M This feature allows you to select from a given set of parameters if the parallel port uses the onboard
I/O controller.
378/IRQ7 Enable onboard LPT port and address is 378, Using IRQ7.(Default Value)
278/IRQ5 Enable onboard LPT port and address is 278,Using IRQ5.
3BC/IRQ7 Enable onboard LPT port and address is 3BC,Using IRQ7.
Disabled Disable onboard parallel port.
Parallel Port Mode
M This feature allows you to connect with an advanced print via the port mode it supports.
SPP Using Parallel port as Standard Parallel Port using IRQ7. (Default Value)
EPP Using Parallel port as Enhanced Parallel Port IRQ5.
ECP Using Parallel port as Extended Capabilities Port using IRQ7.
ECP+EPP Using Parallel port as ECP & EPP mode.