Gigabyte GA-8VM533 - 6-Channel Audio Function Introduction

- 68 -
GA-8VM533 Motherboard
English
Use the back audio panel to connect the audio
output without any additional module.
STEP 1 :
Connect the front channels to "Line Out", the rear
channels to "Line In", and the Center/Subwoofer
channels to "MIC In".
Line Out
Line In
M IC In
STEP 2 :
After installation of the audio driver, you'll find an
icon on the taskbar's status area. Right click
the audio icon "Volum e" from the windows tray at
the bottom of the screen. Click the "Adjust Audio
Properties".
6-Channel Audio Function Introduction
The installation of Windows 98SE/2K/ME/XP is very simple. Please follow next step to install the
function!
STEP 3 :
Click "Advanced".
Basic 6 Channel Analog Audio Output Mode