Introduction
English
- 5 -
Form Factor — 24.5cm x 20.8cm Micro ATX size form factor, 4 layers PCB
CPU — Socket 478 for Intel
®
Micro FC-PGA2 Pentium
®
4 processor
— Support Intel
®
Pentium
®
4 (Northwood) processor
— Support Intel
®
Pentium
®
4 Processor with HT Technology *
— Intel
®
Pentium
®
4 533/400MHz FSB
— 2nd cache depends on CPU
Chipset — VIA P4M533 Memory/AGP/PCI Controller (PAC)
— VIA VT8235 Integrated Peripheral Controller (PSIPC)
Memory — 2 184-pin DDR sockets
— Supports DDR266/DDR200 DIMM
— Supports up to 2GB DDR (Max)
— Supports only 2.5V DDR DIMM
I/O Control — ITE8705
Slots — 1 AGP slot supports 4X mode(1.5V)
— 3 PCI slot supports 33MHz & PCI 2.2 compliant
On-Board IDE — 2 IDE bus master (UDMA33/ATA66/ATA100/ATA133) IDE ports
for up to 4 ATAPI devices
— Supports PIO mode3,4 (UDMA 33/ATA66/ATA100/ATA133) IDE
& ATAPI CD-ROM
On-Board Peripherals — 1 Floppy port supports 2 FDD with 360K, 720K,1.2M, 1.44M
and 2.88M bytes
— 1 Parallel port supports Normal/EPP/ECP mode
— 1 Serial port (COMA), 1 VGA port
— 6 USB 2.0/1.1 ports (2 x Rear, 4 x Front by cable)
— 1 Front Audio connector
Chapter 1 Introduction
to be continued......
Features Summary