- 38 -GA-8VM533 Motherboard
English
Power Management Setup
Figure 5: Power Management Setup
ACPI Suspend Type
S1/POS Set suspend type to Power On Suspend under ACPI OS
(Power On Suspend). (Default value)
S3/STR Set suspend type to Suspend To RAM under ACPI OS (Suspend To RAM).
USB Device Wakeup From S3(When ACPI Suspend Type is set [S3/STR])
USB device wakeup From S3 can be set when ACPI standby state set to S3/STR.
Enabled USB Device can wakeup system from S3.
Disabled USB Device can't wakeup system from S3. (Default value)
CMOS Setup Utility-Copyright (C) 1984-2003 Award Software
Power Management Setup
ACPI Suspend Type [S1(POS)] Item Help
x USB Device Wake-Up From S3 Disabled Menu Level u
Soft-Off by PWRBTN [Instant-off] [S1]
AC Back Function [Soft-Off] Set suspend type to
Keyboard Power On [Disabled] Power On Suspend under
Mouse Power On [Disabled] ACPI OS
PME Event Wake Up [Enabled]
Modem Ring Resume [Enabled] [S3]
Resume by Alarm [Disabled] Set suspend type to
x Date(of Month) Alarm Everyday Suspend to RAM under
x Time(hh:mm:ss) Alarm 0 : 0 : 0 ACPI OS
higf: Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
To Next Page
Loading...