STEP 2:
In the Audio Control Panel, click the Audio I/O tab.
In the upper left list, click 6CH Speaker.
STEP 3:
Connect the 6-channel speakers to the audio jacks
on the motherboard and the surround cable, a
small window will pop up and ask you what type
of equipment is connected. Choose a device de-
pending on the type of speaker connected (6-
channel audio consists of Front Speaker Out (Line
Out), Rear Speaker Out, and Center/Subwoofer
Speaker Out) then click OK. The 6-channel audio
setup is completed.
Setting Up 8-Channel Audio
STEP 1 :
After installation of the audio driver, you should find
an Audio Manager ^ icon in your system tray
(you can also find the icon in Control Panel). Double-
click the icon to open the Audio Control Panel.
- 67 -
Appendix
To Next Page
Loading...
