To Next Page

To Previous Page

GA-965P-DS3P Motherboard - 32 -

English

The Main Menu (For example: BIOS Ver. : F4a)

Once you enter Award BIOS CMOS Setup Utility, the Main Menu (as figure below) will appear on the

screen. Use arrow keys to select among the items and press <Enter> to accept or enter the sub-menu.

1. If you don’t find the settings you want, press "Ctrl+F1" to access advanced options.

2. Select the Load Optimized Defaults item in the BIOS Setup when somehow the system

is not stable as usual. This action makes the system reset to the default settings for stability.

3. The BIOS Setup menus described in this chapter are for reference only and may differ from

the exact settings for your motherboard.

<TAB> : POST Screen

Press the TAB key to see BIOS POST screen.

(To show the BIOS POST screen at system startup, refer to the instructions on the Full Screen LOGO Show item on page 37.)

<DEL> : BIOS Setup/Dual BIOS

Press the DELETE key to enter BIOS Setup program.

<F9> : Xpress Recovery2

Press the F9 key to enter the Xpress Recovery2 screen.

<F12> : Boot Menu

Press the F12 key to enter Boot Menu to select the first boot device.

Startup Screen:

 Standard CMOS Features

 Advanced BIOS Features

 Integrated Peripherals

 Power Management Setup

 PnP/PCI Configurations

 PC Health Status

 MB Intelligent Tweaker(M.I.T.)

Load Fail-Safe Defaults

Load Optimized Defaults

Set Supervisor Password

Set User Password

Save & Exit Setup

Exit Without Saving

ESC: Quit : Select Item F11: Save CMOS to BIOS

F8: Dual BIOS/Q-Flash F10: Save & Exit Setup F12: Load CMOS from BIOS

Time, Date, Hard Disk Type...

<TAB>:POST Screen <DEL>:BIOS Setup/Dual BIOS <F9>:XpressRecovery2 <F12>:Boot Menu

Gigabyte GA-965P-DS3P User Manual

Questions and Answers: