BIOS Setup- 47 -
English
High Speed DRAM DLL Settings
Provides two different DRAM Timing configurations. If your system becomes unstable after you
overclock the DDR2 memory, select Option 1 or Option 2 to help make your system more stable.
Option 1 DRAM Timing Configuration 1. (Default value)
Option 2 DRAM Timing Configuration 2.
System Voltage Control
This item allows the users to decide whether to configure system voltage settings by their
requirements.
Auto Lets the BIOS configure all system voltage settings.
Manual Manually configure the system voltage settings. (Default value)
DDR2 OverVoltage Control
Normal Supply DDR2 voltage as DDR2 required. (Default value)
+0.025V ~ +0.775V Increase DDR2 voltage by 0.025V to 0.775V.
PCI-E OverVoltage Control
Normal Supply PCIe voltage as PCIe required. (Default value)
+0.05V ~ +0.35V Increase PCIe voltage by 0.05V to 0.35V.
(G)MCH OverVoltage Control
Normal Supply (G)MCH voltage as (G)MCH required. (Default value)
+0.05V ~ +0.75V Increase (G)MCH voltrage by 0.05V to 0.75V.
FSB OverVoltage Control
Normal Supply FSB voltage as FSB required. (Default value)
+0.05V ~ +0.35V Increase FSB voltrage by 0.05V to 0.35V.
CPU Voltage Control
Supports adjustable CPU vcore. The adjustable range is dependent on CPUs.
(Default value: Normal)
Please note that by overclocking your system through the increase of the CPU voltage, damage
to the CPU or decrease in the CPU life expectancy may occur.
Normal CPU Vcore
Display your CPU's normal voltage.
To Next Page
Loading...
Need help?
General
