Gigabyte GA-970A-D3P - Page 36

BIOS Setup
- 36 -
& CPU core Control
(Note 1)
Allows you to determine whether to manually enable/disable CPU cores. Automatic mode allows the BIOS
toenableallCPUcores(numberofcoresavailabledependsontheCPUbeingused).(Default:Automatic
mode)
& Core C6 State
(Note 1)
 AllowsyoutodeterminewhethertolettheCPUenterC6modeinsystemhaltstate.Whenenabled,the
CPU core frequency will be reduced during system halt state to decrease power consumption. The C6
stateisamoreenhancedpower-savingstatethanC1.(Default:Enabled)
& HPC Mode
(Note 1)
 AllowsyoutodeterminewhethertoenableHighPerformanceComputing(HPC)modefortheCPU.Enabled
preventstheCPUfrequencyfrombeingloweredduringsystemhaltstate.(Default:Disabled)
& APM (AMD Application Power Management)
(Note 1)
Enabled Dynamically monitors the power consumption of the CPU cores and automatically
optimizestheCPUtoitsbestperformancelevel.(Default)
Disabled Disables this function.
& ExtremeMemoryProle(X.M.P.)
(Note 2)
 AllowstheBIOStoreadtheSPDdataonXMPmemorymodule(s)toenhancememoryperformancewhen
enabled.
Disabled  Disablesthisfunction.(Default)
Prole1  UsesProle1settings.
Prole2
(Note2)
 UsesProle2settings.
& System Memory Multiplier
Allows you to set the system memory multiplier. Auto sets memory multiplier according to memory SPD
data.(Default:Auto)
& Memory Frequency (MHz)
This value is automatically adjusted according to the BCLK Clock Control and System Memory Multiplier
settings.
(Note1) ThisitemispresentonlywhenyouinstallaCPUthatsupportsthisfeature.
(Note2) Thisitemispresentonlywhenyouinstallamemorymodulethatsupportsthisfeature.