Gigabyte GA-B75-D3V - Internal Graphics

- 47 -
BIOS Setup
& Init Display First
Specifes the frst initiation of the monitor display from the installed PCI graphics card, PCI Express graphics
card, or the onboard graphics.
Auto  LetsBIOSautomaticallycongurethissetting.(Default)
IGFX  Setstheonboardgraphicsastherstdisplay.
PEG  SetsthePCIExpressgraphicscardonthePCIEX16slotastherstdisplay.
PCI  SetsthegraphicscardonthePCIslotastherstdisplay.
& Internal Graphics
Enables or disables the onboard graphics function. (Default: Auto)
& Internal Graphics Memory Size
 Allowsyoutosettheonboardgraphicsmemorysize.Optionsare:32M~1024M.(Default:64M)
& DVMT Total Memory Size
Allows you to allocate the DVMT memory size of the onboard graphics. Options are: 128M, 256M, MAX.
(Default: MAX)
& Intel(R) Rapid Start Technology
 EnablesordisablesIntelRapidStartTechnology.ThisitemiscongurableonlywhenanSSDisinstalled.
(Default: Disabled)
& Legacy USB Support
 AllowsUSBkeyboard/mousetobeusedinMS-DOS.(Default:Enabled)
& XHCI Hand-off
Determines whether to enable XHCI Hand-off feature for an operating system without XHCI Hand-off
support. (Default: Enabled)
& EHCI Hand-off
Determines whether to enable EHCI Hand-off feature for an operating system without EHCI Hand-off
support. (Default: Disabled)
& Port 60/64 Emulation
 EnablesordisablesemulationofI/Oports64hand60h.Thisshouldbeenabledforfulllegacysupport
forUSBkeyboards/miceinMS-DOSorinoperatingsystemthatdoesnotnativelysupportUSBdevices.
(Default: Disabled)
& USB Storage Devices
Displays a list of connected USB mass storage devices. This item appears only when a USB storage device
is installed.