Gigabyte GA-B75-D3V - EZ Setup for Simplified Configuration

- 67 -
Unique Features
4-6 EZ Setup
EZ Setup consists of the EZ Smart Response
(Note)
, EZ Rapid Start, and EZ Smart Connect utilities. The EZ
Setupapplicationfreesyoufromcomplicatedinstallationandcongurationprocessandallowsyoutousethe
application with ease.
Installing EZ Setup
After inserting the GIGABYTE motherboard driver disk, click Express Install to install all motherboard drivers. After
completion, go to the New Program menu and click Install on the right of the EZ Setup application to install it.
Launching EZ Setup
Step 1:
While in the operating system, go to Start\All Programs\GIGABYTE and select EZ Setup. (Figure 1)
Step 2:
Select the utilities you wish to install and click Setup to begin the installation. (Figure 2)
(Note) Not supported on the Intel B75 Chipset.
• Fordetailedcongurations,pleaserefertoIntel'sdocumentation.
• Duringtheinstallationprocess,thesystemwillconguretheBIOSsettingsandinstallrequired
drivers. The system may restart automatically a few times.
Figure 1
Figure 2