BIOS Configuration
4-3
• Chipset features setup
This setup page includes all the items of chipset special features.
• Power management setup
This setup page includes all the items of Green function features.
• PNP/PCI configuration
This setup page includes all the configurations of PCI & PnP ISA
resources.
• Load BIOS defaults
BIOS Defaults indicates the most appropriate value of the system
parameters that the system would be in safe configuration.
• Load Performance defaults
Performance Defaults indicates the value of the system parameters that
the system would be in the best performance configuration.
• Integrated peripherals
This setup page includes all onboard peripherals.
• Supervisor password
Change, set, or disable password. It allows you to limit access to the
system and Setup, or just to Setup.
• User password
Change, set, or disable password. It allows you to limit access to the
system.
• IDE HDD auto detection
Automatically configure hard disk parameters.
• Save & exit setup
Save CMOS value settings to CMOS and exit setup.
• Exit without saving
Abandon all CMOS value changes and exit setup.
To Next Page
Loading...
