Gigabyte GA-EX58-UD4P - MB Intelligent Tweaker(M.I.T.)

- 45 - BIOS Setup
2-3 MB Intelligent Tweaker(M.I.T.)
(Note 1) This item appears only if you install a CPU that supports this feature.
(Note 2) This item appears only if you install a memory module that supports this feature.
Whether the system will work stably with the overclock/overvoltage settings you made is
dependent on your overall system configurations. Incorrectly doing overclock/overvoltage
may result in damage to CPU, chipset, or memory and reduce the useful life of these
components. This page is for advanced users only and we recommend you not to alter the
default settings to prevent system instability or other unexpected results. (Inadequately alter-
ing the settings may result in system's failure to boot. If this occurs, clear the CMOS values
and reset the board to default values.)
CMOS Setup Utility-Copyright (C) 1984-2008 Award Software
MB Intelligent Tweaker(M.I.T.)
CPU Clock Ratio
(Note 1)
[22X]
CPU Frequency 2.93GHz(133x22)
 Advanced CPU Features [Press Enter]
QPI Link Speed [Auto]
QPI Link Speed 4.8GHz
 UnCore & QPI Features [Press Enter]
Base Clock(BCLK) Control [Disabled]
x BCLK Frequency (Mhz) 133
 Advanced Clock Control [Press Enter]
Performance Enhance [Turbo]
Extreme Memory Profile (X.M.P.)
(Note 2)
[Disabled]
System Memory Multiplier (SPD) [Auto]
Memory Frequency (Mhz) 1066 1066
DRAM Timing Selectable (SPD) [Auto]
Profile DDR Voltage 1.5V
Profile QPI Voltage 1.2V
>>>>> Channel A
x CAS Latency Time 8 Auto
x tRCD 7 Auto
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level
CMOS Setup Utility-Copyright (C) 1984-2008 Award Software
MB Intelligent Tweaker(M.I.T.)
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
x tRP 7 Auto
x tRAS 20 Auto
>>>>> Channel B
x CAS Latency Time 8 Auto
x tRCD 7 Auto
x tRP 7 Auto
x tRAS 20 Auto
>>>>> Channel C
x CAS Latency Time 8 Auto
x tRCD 7 Auto
x tRP 7 Auto
x tRAS 20 Auto
 Advanced DRAM Features [Press Enter]
Voltage Types Normal Current
------------------------------------------------------------------
Load-Line Calibration [Disabled]
CPU Vcore 1.22500V [Auto]
QPI/Vtt Voltage 1.200V [Auto]
IOH Core 1.100V [Auto]
DRAM Voltage 1.500V [Auto]
 Advanced Voltage Control [Press Enter]
Item Help
Menu Level