Need help?Do you have a question about the Gigabyte GA-EX58-UD5 and is the answer not in the manual?
General| Memory voltage | 1.5 V |
|---|---|
| Number of memory slots | 6 |
| Maximum internal memory | 24 GB |
| Processor socket | Socket B (LGA 1366) |
| Processor manufacturer | Intel |
| USB 2.0 connectors | 12 |
| Power fan connector | Yes |
| Number of SATA connectors | 10 |
| Modem (RJ-11) ports | 0 |
| PS/2 ports quantity | 2 |
| USB 2.0 ports quantity | 8 |
| Firewire (IEEE 1394) ports | 1 |
| Audio chip | Realtek ALC889A |
| Audio output channels | 7.1 channels |
| Motherboard form factor | ATX |
| Compatible operating systems | Microsoft Windows Vista, XP |
| Networking features | 10/100/1000 Mbit |
| Trial software | Norton Internet Security |
Weight and Dimensions| Depth | 244 mm |
|---|---|
| Width | 305 mm |
Step-by-step instructions for installing the CPU and its cooler.
Guidelines and procedures for installing RAM modules.
Instructions for installing expansion cards into PCI/PCIe slots.
Menu for configuring clock, frequency, and voltages.
Options to load fail-safe or optimized BIOS default settings.
Detailed settings for CPU clock, frequency, and voltage adjustments.
Configuration options for CPU cores, threading, and power saving.
Controls for Base Clock (BCLK) and PCI Express frequency.
Settings for memory performance, XMP profiles, and timings.
Detailed timing parameters for DDR3 memory channels.
Voltage adjustments for CPU, Vcore, QPI/Vtt, and CPU PLL.
Voltage adjustments for DRAM, termination, and data/address VRefs.
Enabling or disabling RAID for SATA controllers or setting AHCI mode.
Restores the safest, most stable BIOS default settings.
Restores the optimal BIOS default settings for performance.
Steps for installing chipset drivers from the motherboard driver disk.
Overview of GIGABYTE's BIOS update tools: Q-Flash and @BIOS.
Step-by-step guide to updating BIOS using the Q-Flash utility.
Guide to updating the BIOS via the @BIOS Windows utility.
Utility for system tuning, overclocking, and fan control in Windows.
Steps for installing and configuring SATA hard drives and RAID.
Installing SATA drives and configuring ICH10R SATA controller mode.
Steps to configure a RAID array using the RAID BIOS utility.
Installing SATA drives and configuring GIGABYTE SATA2/JMB322 controller.
Creating a driver diskette for SATA RAID/AHCI installation.
Installing SATA RAID/AHCI drivers during OS installation.
Common issues and solutions for motherboard problems.
A flowchart-based procedure for diagnosing startup issues.
To Next Page