Gigabyte GA-G41M-Combo - Page 36

BIOS Setup - 36 -
tWR
Options are: Auto (default), 1~31.
tRFC
Options are: Auto (default), 1~255.
tRTP
Options are: Auto (default), 1~15.
Command Rate(CMD)
Options are: Auto (default), 1~3.
>>>>> Channel A/B
Channel A/B Timing Settings
CMOS Setup Utility-Copyright (C) 1984-2010 Award Software
Channel A/B Timing Settings
higf
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level

x Static tRead Value Auto
x tRD Phase0 Adjustment Auto
x tRD Phase1 Adjustment Auto
x tRD Phase2 Adjustment Auto
x tRD Phase3 Adjustment Auto
x Trd2rd(Different Rank) Auto
x Twr2wr(Different Rank) Auto
x Twr2rd(Different Rank) Auto
x Trd2wr(Same/Diff Rank) Auto
x DIMM1 Clock Skew Control Auto
x DIMM2 Clock Skew Control Auto
x DDR Write Leveling Auto
x DDR Write Training Auto
Static tRead Value
Options are: Auto (default), 1~15.
tRD Phase0 Adjustment
Options are: Auto (default), 0-Normal, 1-Advanced.
tRD Phase1 Adjustment
Options are: Auto (default), 0-Normal, 1-Advanced.
tRD Phase2 Adjustment
Options are: Auto (default), 0-Normal, 1-Advanced.
tRD Phase3 Adjustment
Options are: Auto (default), 0-Normal, 1-Advanced.
Trd2rd(Different Rank)
Options are: Auto (default), 1~15.
Twr2wr(Different Rank)
Options are: Auto (default), 1~15.