Gigabyte GA-J1800N-D2H - Enhanced C State; Sata Mode

- 21 -
` PPMConguration
& EIST
Enables or disables Enhanced Intel
®
Speed Step Technology (EIST). Depending on CPU loading, Intel
®
EIST technology can dynamically and effectively lower the CPU voltage and core frequency to decrease
average power consumption and heat production. (Default: Enabled)
& CPU C state Report
Enables or disables support for CPU's power-saving functions. (Default: Enabled)
& Enhanced C state
Enables or disables Intel
®
CPU Enhanced Halt (C1E) function, a CPU power-saving function in system halt
state. When enabled, the CPU core frequency and voltage will be reduced during system halt state to decrease
power consumption. ThisitemiscongurableonlywhenCPU C state Report is enabled. (Default: Enabled)
& Max CPU C-state
Allows you to determine the maximum C state that the CPU will support. Options include: C6, C1 (default).
ThisitemiscongurableonlywhenCPU C state Report is enabled.
` ThermalConguration
& DTS
Enables or disables the CPU overheating protection function. (Default: Disabled)
& Critical Trip Point
Allows you to set the CPU temperature threshold. If the CPU temperature reaches this value, the operating
systemwillshutdownthesystem.ThisitemiscongurableonlywhenDTS is enabled. (Default: 100 C)
& Passive Trip Point
Allows you to set the CPU temperature threshold. If the CPU temperature reaches this value, the CPU frequency
willbeautomaticallyreduced.ThisitemiscongurableonlywhenDTS is enabled. (Default: 85 C)
` IDEConguration
& Serial-ATA (SATA)
Enables or disables the integrated SATA controllers. (Default: Enabled)
& SATA Mode
 AllowsyoutodecidewhethertoconguretheSATAcontrollerintegratedintheChipsettoAHCImode.This
itemiscongurableonlywhenSerial-ATA(SATA) is set to Enabled.
IDEMode  DisablesRAIDfortheSATAcontrollersandcongurestheSATAcontrollerstoIDE
mode.
AHCIMode CongurestheSATAcontrollerstoAHCImode.AdvancedHostControllerInterface
(AHCI)isaninterfacespecicationthatallowsthestoragedrivertoenableadvanced
SerialATAfeaturessuchasNativeCommandQueuingandhotplug.(Default)
& Serial-ATA Port 0/Serial-ATA Port 1
 EnablesordisableseachSATAport.ThisitemiscongurableonlywhenSerial-ATA (SATA) is enabled.
The area below displays the current status of each SATA port.