Gigabyte GA-M52S-S3P User Manual

GA-M52S-S3P Motherboard - 78 -
English
B. Installing Windows Vista
Step 1:
Restart your system to boot from the Windows Vista setup disk and perform standard OS installation
steps. When a screen similar to that below appears (RAID or AHCI hard drive(s) will not be detected at
this stage), select Loading Drivers. (Figure 6).
Figure 6
Step 2:
Specify the location where the driver is saved, such as your floppy disk (Figure 7).
Figure 7

Gigabyte GA-M52S-S3P Specifications

General

Brand	Gigabyte
Model	GA-M52S-S3P
Category	Motherboard
Language	English