Gigabyte GA-P75-D3 - Product Specifications

- 10 -Hardware Installation
1-2 Product Specifications
CPU Support for Intel 
®
Core
™
i7 processors/Intel
®
Core
™
i5 processors/
Intel
®
Core
™
i3 processors/Intel
®
Pentium
®
processors/Intel
®
Celeron
®
processors
in the LGA1155 package
(Go to GIGABYTE's website for the latest CPU support list.)
L3 cache varies with CPU 
Chipset Intel 
®
B75 Express Chipset
Memory 4 x 1.5V DDR3 DIMM sockets supporting up to 32 GB of system memory 
* Due to Windows 32-bit operating system limitation, when more than 4 GB of physical
memory is installed, the actual memory size displayed will be less than 4 GB.
Dual channel memory architecture 
Support for DDR3 1600/1333/1066 MHz memory modules 
* To support DDR3 1600 MHz, you must install an Intel 22nm (Ivy Bridge) CPU.
Support for non-ECC memory modules 
Support for Extreme Memory Profile (XMP) memory modules 
* To support XMP memory, you must install an Intel 22nm (Ivy Bridge) CPU.
(Go to GIGABYTE's website for the latest supported memory speeds and memory
modules.)
Audio Realtek ALC887 codec 
High Definition Audio 
2/4/5.1/7.1-channel 
* To configure 7.1-channel audio, you have to use an HD front panel audio module
and enable the multi-channel audio feature through the audio driver.
Support for S/PDIF Out 
LAN 1 x Realtek GbE LAN chip (10/100/1000 Mbit) 
Expansion Slots 1 x PCI Express x16 slot, running at x16 (PCIEX16) 
(PCIEX16 slot conforms to PCI Express 3.0 standard.)
* For optimum performance, if only one PCI Express graphics card is to be installed,
be sure to install it in the PCIEX16 slot.
* The PCI Express x16 slot supports up to PCI Express 2.0 standard when an Intel
32nm (Sandy Bridge) CPU is installed.
1 x PCI Express x16 slot, running at x4 (PCIEX4) 
1 x PCI Express x1 slot 
(PCIEX4/PCIEX1 slots conform to PCI Express 2.0 standard.)
4 x PCI slots 
Multi-Graphics
Technology
Support for AMD CrossFireX 
™
technology
* The PCIEX16 slot operates at up to x4 mode when AMD CrossFireX
™
is enabled.
Storage Interface Chipset: 
- 1 x SATA 6Gb/s connector (SATA3 0) supporting up to 1 SATA 6Gb/s
device
- 4 x SATA 3Gb/s connectors (SATA2 1~4) supporting up to 4 SATA 3Gb/s
devices
- 1 x mSATA connector