Gigabyte GA-VM900M - PC Health Status Monitoring; System Voltages, Temperatures, and Fans

GA-VM900M Motherboard - 40 -
English
2-6 PC Health Status
Reset Case Open Status
Disabled Don't reset case open status. (Default value)
Enabled Clear case open status at next boot.
Case Opened
If the case is closed, Case Opened will show "No."
If the case is opened, Case Opened will show "Yes."
If you want to reset Case Opened value, enable Reset Case Open Status and save the change
to CMOS, and then your computer will restart.
Current Voltage(V) Vcore / DDR2 1.8V / +3.3V / +12V
Detect system's voltage status automatically.
System/CPU Temperature
Detect system/CPU temperature automatically.
Current SYS/CPU FAN Speed (RPM)
Detect system/CPU fan speed status automatically.
System/CPU Warning Temp.
60
o
C / 140
o
F Monitor system/CPU temperature at 60
o
C / 140
o
F.
70
o
C / 158
o
F Monitor system/CPU temperature at 70
o
C / 158
o
F.
80
o
C / 176
o
F Monitor system/CPU temperature at 80
o
C / 176
o
F.
90
o
C / 194
o
F Monitor system/CPU temperature at 90
o
C / 194
o
F.
Disabled Disable this function. (Default value)
SYS/CPU FAN Fail Warning
Disabled Disable the fan fail warning function. (Default value)
Enabled Enable the fan fail warning function.
CMOS Setup Utility-Copyright (C) 1984-2007 Award Software
PC Health Status
Reset Case Open Status [Disabled]
Case Opened Yes
Vcore OK
DDR2 1.8V OK
+3.3V OK
+12V OK
System Temperature 46
o
C/114
o
F
CPU Temperature 47
o
C/116
o
F
Current SYS FAN Speed 0 RPM
Current CPU FAN Speed 2880 RPM
System Warning Temp. [Disabled]
CPU Warning Temp. [Disabled]
SYS FAN Fail Warning [Disabled]
CPU FAN Fail Warning [Disabled]
CPU Smart FAN Control [Enabled]
KLJI: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level`