To Next PageTo Next Page
Need help?Do you have a question about the Gigabyte GA-VM900M and is the answer not in the manual?
General| Number of memory slots | 2 |
|---|---|
| Maximum internal memory | 4 GB |
| Processor socket | LGA 775 (Socket T) |
| Processor manufacturer | Intel |
| Power fan connector | Yes |
| Number of COM connectors | 1 |
| WiFi-AP antenna jack | No |
| USB 2.0 ports quantity | 4 |
| Audio chip | VIA VT1708A |
| Power source type | ATX |
| Motherboard chipset | VIA P4M900 |
| Motherboard form factor | micro ATX |
| Parallel processing technology support | Not supported |
| LAN controller | Realtek RTL8201CL |
| Networking features | 10/100Mb Ethernet |
Weight and Dimensions| Depth | 233 mm |
|---|---|
| Width | 244 mm |
Visual guide to motherboard components and their locations.
Essential safety and handling guidelines before installing hardware.
Comprehensive overview of the motherboard's capabilities and specifications.
Descriptions of Rear Panel I/O, I/O Control, and Internal Connectors.
Step-by-step guide for safely installing the CPU into its socket.
Instructions for attaching the CPU cooler and its fan connector.
Guide for inserting DDR2 memory modules into the DIMM slots correctly.
Procedure for installing expansion cards like graphics cards.
Details on PS/2, USB, LAN, and audio jacks on the back panel.
Identifies all internal connectors for system components.
Guide for connecting ATX 12V and main ATX power connectors.
Instructions for connecting IDE and SATA storage devices.
Pin assignments for chassis front panel switches and LEDs.
Overview of the BIOS Setup program and its purpose.
Monitors system voltage, CPU/system temperature, and fan speeds.
Step-by-step guide for installing chipset drivers using Xpress Install.
Instructions for updating the BIOS using the Q-Flash utility.
Detailed steps for BIOS flashing and post-update default loading.
Steps to install SATA drives and configure BIOS settings.
Steps for creating RAID arrays and selecting disk drives.
Setting stripe size and initiating the RAID array creation process.
Guide for loading SATA drivers during Windows installation.
Procedure to select the correct SATA controller driver in Windows Setup.
Step-by-step procedure to diagnose system startup problems.
