- 93 - Appendix
Refer to the following for installing the driver during the Windows setup process.
Step 1:
Restart your system to boot from the Windows XP setup disk and press <F6> as soon as you see the mes-
sage "Press F6 if you need to install a 3rd party SCSI or RAID driver." A screen will then appear asking you to
specify an additional SCSI adapter. Press <S>.
Step 3:
On the next screen, press <Enter> to continue the driver installation. After the driver installation, you can pro-
ceed with the Windows XP installation.
Step 2:
bit items depending on whether you want to install the 32-bit or 64-bit version of Windows XP (Figure 4). Both
of the Marvell shared library and Marvell 91xx SATA Controller need to be installed. Below we assume
that you are installing the 32-bit version. First select and press
<Enter>. On the next screen, press <S> to return to the screen in Figure 4. Then select Marvell 91xx SATA
Controller 32bit Driver
press <Enter> to continue the driver installation.
Figure 4
Windows Setup
using a device support disk provided by an adapter manufacturer.
Select the SCSI Adapter you want from the following list, or press ESC
to return to the previous screen.
ENTER=Select F3=Exit
Marvell 91xx SATA Controller 32bit Driver
Marvell 91xx SATA Controller 64bit Driver
To Next Page
Loading...
