Gigabyte GA-X99-SOC Force - Peripherals

BIOS Setup
- 60 -
2-6 Peripherals
& Initial Display Output
 SpeciestherstinitiationofthemonitordisplayfromthePCIExpressgraphicscards.
PCIe1Slot SetsthegraphicscardonthePCIE_1slotastherstdisplay.(Default)
PCIe2Slot SetsthegraphicscardonthePCIE_2slotastherstdisplay.
PCIe3Slot SetsthegraphicscardonthePCIE_3slotastherstdisplay.
PCIe4Slot SetsthegraphicscardonthePCIE_4slotastherstdisplay.
& Audio LED
Enables or disables the onboard audio LED function.
Off Disables this function.
StillMode  TheLEDstaysconstantlyon.(Default)
Beat Mode The brightness of the LED changes according to the music rhythm.
Pulse Mode The brightness of the LED changes slowly and smoothly like breath.
& Legacy USB Support
 AllowsUSBkeyboard/mousetobeusedinMS-DOS.(Default:Enabled)
& XHCI Hand-off
Determines whether to enable XHCI Hand-off feature for an operating system without XHCI Hand-off
support.(Default:Enabled)
& EHCI Hand-off
Determines whether to enable EHCI Hand-off feature for an operating system without EHCI Hand-off
support.(Default:Disabled)
& USBStorageDevices
Displays a list of connected USB mass storage devices. This item appears only when a USB storage device
is installed.
& Two Layer KVM Switch
Set to EnabledtoensureproperdevicefunctionalitywhenchainingtwoKVMswitches.(Default:Disabled)