EasyManua.ls Logo

Gigabyte GA-Z170-Gaming K3 - Page 14

Gigabyte GA-Z170-Gaming K3
61 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 14 -
(The item name may differ depending on
your operating system.)
RJ-45 LAN Port
The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate.
The following describes the states of the LAN port
LEDs.
Connection/
Connection/Speed LED: Activity LED:
Speed LED Activity LED
State
Description
Orange
1 Gbps data rate
Green
100 Mbps data
rate
Off
10 Mbps data rate
State
Description
Blinking
Data transmission or
receiving is
occurring
Off
No data transmission or receiving
is occurring
LAN Port
Center/Subwoofer Speaker Out (Orange)
Use this audio jack to connect center/subwoofer
speakers in a 5.1/7.1-channel audio configuration.
Rear Speaker Out (Black)
Use this audio jack to connect rear
speakers in a 7.1-channel audio
configuration. Side Speaker Out (Gray)
Use this audio jack to connect side
speakers in a 4/5.1/7.1-channel audio
configuration. Line In (Blue)
The line in jack. Use this audio jack for line in devices such as an optical drive,
walkman, etc.
Line Out (Green)
The line out jack. This jack supports audio amplifying function. For better sound quality,
it is recommended that you connect your headphone/speaker to
this jack (actual effects may vary by the
device being used). Use this audio jack for a headphone or 2-channel
speaker. This jack can be used to connect front speakers in a
4/5.1/7.1-channel audio configuration. Mic In (Pink)
The Mic in jack.
Please visit GIGABYTE's website for more software information.
When removing the cable connected to a back panel connector, first
remove the cable from your device and then remove it from the motherboard.
When removing the cable, pull it straight out from the connector. Do not rock it side to
side to prevent an electrical short inside the cable connector.

Related product manuals