- 13 -
1-5 Installing an Expansion Card
Read the following guidelines before you begin
to install an expansion card:
• Make sure the motherboard supports the expansion card. Carefully
read the manual that came with your expansion card.
• Always turn off the computer and unplug the power cord from the power outlet before
installing an expansion card to prevent hardware damage.
1-6 Back Panel Connectors
connection to this port.
USB 3.1 Type-A Port (Red)
The USB 3.1 port supports the USB 3.1
specification and is compatible to the
USB 3.0/2.0/1.1 specification. Use this port for USB
devices.
(Note) The DVI-D port does not support
D-Sub connection by adapter.
HDMI Port
The HDMI port is HDCP compliant and supports Dolby
True HD and DTS HD
Master Audio formats. It also supports up to 192KHz/16bit 8-channel LPCM audio
output. You can use this port to connect
your HDMI-supported monitor. The maximum supported
resolution is 4096x2160@24 Hz, but the actual
resolutions supported are dependent on the
monitor being used.
After installing the HDMI device, make sure to
set the default sound playback device to HDMI.
To Next Page
Loading...
