- 47 -
Power On By Keyboard
Allows the system to be turned on by a PS/2 keyboard wake-up event.
Note: To use this function, you need an ATX power supply providing at least 1A on
the +5VSB lead. Disabled Disables this function. (Default)
Any Key Press any key to turn on the system.
Keyboard 98 Press POWER button on the
Windows 98 keyboard to turn on the
system. Password Set a password with
1~5 characters to turn on the
system.
Power On Password
Set the password when Power On By Keyboard is set to Password.
Press <Enter> on this item and set a
password with up to 5 characters and
then press <Enter> to accept. To turn on
the system, enter the password and press
<Enter>.
Note: To cancel the password, press <Enter> on
this item. When prompted for the password,
press <Enter> again without entering the password to clear the password
settings.
Power On By Mouse
Allows the system to be turned on by a PS/2 mouse wake-up event.
Note: To use this function, you need an ATX power supply providing at least 1A on
the +5VSB lead. Disabled Disables this function. (Default)
Move Move the mouse to turn on the system.
Double Click Double click on left
button on the mouse to turn
on the system.
ErP
Determines whether to let
the system consume least power
in S5 (shutdown) state.
(Default: Disabled)
Note: When this item is set to Enabled, the following functions will become
unavailable: Resume by Alarm, PME event wake up, power
on by mouse, power on by keyboard, and wake on LAN.
Soft-Off by PWR-BTTN
Configures the way to turn
off the computer in MS-DOS mode
using the power button.
Instant-Off Press the power
button and then the system
will be turned off
instantly. (Default)
Delay 4 Sec. Press and hold the
power button for 4 seconds to turn
off the system. If the power button is
pressed for less than 4 seconds, the system will enter suspend mode.
To Next Page
Loading...
