- 48 -
Power Loading
Enables or disables dummy load. When the power supply is at low load, a self-protection
will activate causing it to shutdown or fail. If this occurs, please set to Enabled. Auto
lets the BIOS automatically configure this setting.
(Default: Auto)
Resume by Alarm
Determines whether to power on the
system at a desired time. (Default:
Disabled) If enabled, set the date and time as
following:
Wake up day: Turn on the system at a
specific time on each day or on a
specific day in a month.
Wake up hour/minute/second: Set the time at which the system will be powered on
automatically.
Note: When using this function, avoid inadequate shutdown from the operating system or
removal of the AC power, or the settings may not be effective.
Platform Power Management
Enables or disables the Active
State Power Management function
(ASPM). (Default: Disabled)
PEG ASPM
Allows you to configure the ASPM mode for
the device connected to the CPU PEG
bus. This item is configurable only when
Platform Power Management is set to Enabled. (Default: Enabled)
PCH ASPM
Allows you to configure the ASPM mode for
the device connected to Chipset's PCI Express
bus. This item is configurable only when
Platform Power Management is set to Enabled. (Default: Enabled)
DMI Link ASPM Control
Allows you to configure the ASPM mode for
both CPU side and Chipset side of the
DMI link. This item is configurable only
when Platform Power Management is set to Enabled. (Default:
Enabled)
To Next Page
Loading...
