- 19 -
Select the proper hole for the M.2
SSD to be installed and refasten the
screw and nut.
When installing different types of M.2 SSDs (including SATA
SSDs, PCIe x4 SSDs, and PCIe x2 SSDs),
be sure to refer to the supported
configurations in the tables below according to
the operating mode of your SATA controller (AHCI
mode or RAID mode).
• AHCI mode:
• RAID mode:
9) F_PANEL (Front Panel Header)
Connect the power switch, reset switch, speaker, chassis intrusion switch/sensor and
system status indicator on the chassis to this header according to the pin assignments
below. Note the positive and negative pins before connecting the cables.
To Next Page
Loading...
