- 31 -
(Note 2) This item is present only when you
install a CPU and a memory module that
support this feature.
System Memory Multiplier
Allows you to set the system memory multiplier. Auto sets memory
multiplier according to memory SPD data. (Default: Auto)
Memory Frequency (MHz)
The first memory frequency value is the normal
operating frequency of the memory being used; the
second is the memory frequency that is automatically adjusted according to
the System Memory Multiplier settings.
Advanced Memory Settings Extreme Memory Profile
(X.M.P.)
(Note)
, System Memory Multiplier, Memory Frequency(MHz)
The settings above are synchronous to those under the same items on the Advanced
Frequency Settings menu.
Memory Boot Mode
(Note)
Provides memory detection and training methods.
Auto Lets the BIOS automatically
configurethissetting. (Default)
Enable Fast Boot Skip memory detection and
training in some specific criteria for
faster memory boot.
Disable Fast Boot Detect and train
memory at every single boot.
Memory Enhancement Settings
Provides several memory performance enhancement
settings: Normal (basic performance), Relax OC,
Enhanced Stability, and Enhanced Performance.
(Default: Enhanced Stability)
Memory Timing Mode
Manual and Advanced Manual allows the Memory Multiplier Tweaker, Channel
Interleaving, Rank
Interleaving, and memory timing settings below to be
configurable. Options are: Auto (default), Manual,
Advanced Manual.
Profile DDR Voltage
When using a non-XMP memory module or Extreme Memory Profile (X.M.P.)
is set to Disabled, the value is displayed according to your memory
specification. When Extreme Memory Profile (X.M.P.) is set to
Profile1 or Profile2, the value is displayed according to
the SPD data on the XMP memory.
Memory Multiplier Tweaker
Provides different levels of memory auto-
tuning. (Default: Auto)
To Next Page
Loading...
