Gigabyte GA-Z87P-D3 - Page 43

- 43 -
BIOS Setup
& CPU Vcore/CPU VRIN/DRAM Voltage/+3.3V/+5V/+12V/CPU VAXG
Displays the current system voltages.
& CPU/System Temperature
Displays current CPU/system temperature.
& CPU/System Fan Speed
Displays current CPU/system fan speeds.
& CPU/System Temperature Warning
 SetsthewarningthresholdforCPU/systemtemperature.Whentemperatureexceedsthethreshold,BIOS
willemitwarningsound.Optionsare:Disabled(default),60
o
C/140
o
F, 70
o
C/158
o
F, 80
o
C/176
o
F, 90
o
C/194
o
F.
& CPU/System Fan Fail Warning
Allows the system to emit warning sound if the fan is not connected or fails. Check the fan condition or fan
connectionwhenthisoccurs.(Default:Disabled)
& CPU Fan Speed Control
Allows you to determine whether to enable the fan speed control function and adjust the fan speed.
Normal  AllowsthefantorunatdifferentspeedsaccordingtotheCPUtemperature.Youcan
adjustthefanspeedwithEasyTunebasedonyoursystemrequirements.(Default)
Silent Allows the fan to run at slow speeds.
Manual Allows you to control the fan speed under the Fan Speed Percentage item.
Full Speed Allows the fan to run at full speeds.
& Fan Speed Percentage
 Allowsyoutocontrolthefanspeed.ThisitemiscongurableonlywhenCPU Fan Speed Control is set
to Manual.Optionsare:0.75PWMvalue/
o
C~2.50PWMvalue/
o
C.
& 1st System Fan Speed Control (SYS_FAN1 Connector)
Allows you to determine whether to enable the fan speed control function and adjust the fan speed.
Normal  Allowsthefantorunatdifferentspeedsaccordingtothesystemtemperature.Youcan
adjustthefanspeedwithEasyTunebasedonyoursystemrequirements.(Default)
Silent Allows the fan to run at slow speeds.
Manual Allows you to control the fan speed under the Fan Speed Percentage item.
Full Speed Allows the fan to run at full speeds.
& Fan Speed Percentage
 Allowsyoutocontrolthefanspeed.Thisitemiscongurableonlywhen1st System Fan Speed Control
is set to Manual.Optionsare:0.75PWMvalue/
o
C~2.50PWMvalue/
o
C.
& 2nd/3rd System Fan Speed Control (SYS_FAN2/ SYS_FAN3 Connectors)
Allows you to determine whether to enable the fan speed control function and adjust the fan speed.
Normal  Allowsthefantorunatdifferentspeedsaccordingtothesystemtemperature.Youcan
adjustthefanspeedwithEasyTunebasedonyoursystemrequirements.(Default)
Silent Allows the fan to run at slow speeds.
Manual Allows you to control the fan speed under the Fan Speed Percentage item.
Full Speed Allows the fan to run at full speeds.
& Fan Speed Percentage
 Allowsyoutocontrolthefanspeed.Thisitemiscongurableonlywhen2nd/3rd System Fan Speed
Control is set to Manual.Optionsare:0.75PWMvalue/
o
C~2.50PWMvalue/
o
C.