Gigabyte GA-Z87P-D3 - Page 71

- 71 -
Conguring SATA Hard Drive(s)
• Performing the Rebuild in the Operating System
Whileintheoperatingsystem,makesurethechipsetdriverhasbeeninstalledfromthemotherboarddriver
disk. Then launch the Intel
®
Rapid Storage Technology utility from the desktop.
Step 1:
Go to the Manage menu and click Rebuild to
another disk in Manage Volume.
The Status item on the left of the screen displays
the rebuild progress.
Step 2:
Select a new drive to rebuild the RAID and click
Rebuild.
Step 3:
After the RAID 1 volume rebuilding, the Status will
display as Normal.