Gigabyte GA-Z87X-UD5H - Page 31

- 31 -
Hardware Installation
13) SPDIF_O (S/PDIF Out Header)
 ThisheadersupportsdigitalS/PDIFOutandconnectsaS/PDIFdigitalaudiocable(providedbyexpansion
cards)fordigitalaudiooutputfromyourmotherboardtocertainexpansioncardslikegraphicscardsand
sound cards. For example, some graphics cards may require you to use a S/PDIF digital audio cable for
digital audio output from your motherboard to your graphics card if you wish to connect an HDMI display
to the graphics card and have digital audio output from the HDMI display at the same time.
For information about connecting the S/PDIF digital audio cable, carefully read the manual for your expan-
sion card.
Pin No. Denition
1 SPDIFO
2 GND
1
14) F1_1394/F2_1394 (IEEE 1394a Header)
 TheheadersconformtoIEEE1394aspecication.TheIEEE1394aheadercanprovideoneIEEE1394a
port via an optional IEEE 1394a bracket. For purchasing the optional IEEE 1394a bracket, please contact
the local dealer.
• Do not plug the USB bracket cable into the IEEE 1394a header.
• Prior to installing the IEEE 1394a bracket, be sure to turn off your computer and unplug the power
cord from the power outlet to prevent damage to the IEEE 1394a bracket.
• To connect an IEEE 1394a device, attach one end of the device cable to your computer and
then attach the other end of the cable to the IEEE 1394a device. Ensure that the cable is
securely connected.
Pin No. Denition
1 TPA+
2 TPA-
3 GND
4 GND
5 TPB+
6 TPB-
7 Power(12V)
8 Power(12V)
9 No Pin
10 GND
DEBUG
PORT
G.QBOFM
10
9
2
1