Gigabyte GA-Z87X-UD5H - Page 77

- 77 -
Conguring SATA Hard Drive(s)
Figure 4
Figure 5
4. Next: After completing the settings above, move to Next and press <Enter> to begin creating the array.
Whenpromptedtoconrmwhethertocreatethisarray,press<Y>toconrmor<N>tocancel(Figure5).
TofurtherconguretheRAIDarray,usetheupordownarrowkeytomovetheselectionbartoselectanitemin
therightblockofthescreenandpress<Enter>todisplayoptions(Figure4).Settherequireditemsinsequence.
Steps:
1. RAID Level: Select a RAID level.
2. Stripe Size:Selectthestripeblocksize.Optionsinclude32KBand64KB.
3. Name:Enteranarraynamewith1~10letters(letterscannotbespecialcharacters).
Marvell BIOS Setup (c) 2011 Marvell Technology Group Ltd.
Congure -
>
Select free disksCreate Virtual Disk
Help
Virtual disk congurations.
ENTER: Select F10: Exit/Save ESC: Return
RAID Level : RAID 0
Max Size (MB) : 931.3GB
Stripe Size : 64KB
Quick Init : Yes
Name : Default
Threshold(%) : 100
Next
HBA 0 : Marvell 0
Virtual Disks
Free Physical Disks
* HDD 0: ST95005620AS
* HDD 1: ST95005620AS
Marvell BIOS Setup (c) 2011 Marvell Technology Group Ltd.
Congure -
>
Select free disksCreate Virtual Disk
Help
Virtual disk congurations.
ENTER: Select F10: Exit/Save ESC: Return
RAID Level : RAID 0
Max Size (MB) : 931.3GB
Stripe Size : 64KB
Quick Init : Yes
Name : Default
Threshold(%) : 100
Next
HBA 0 : Marvell 0
Virtual Disks
Free Physical Disks
* HDD 0: ST95005620AS
* HDD 1: ST95005620AS
Do you want to create this virtual disk?
Yes No
Create Virtual Disk