Gigabyte GS Series User Manual

- 11 -
SelectingtheInputSource
1. Move the Control button right ( ) to
enter the Input menu.
2. Move the Control button center ( ) to
select the desired input source. Then
press the Control button to confirm.
OPERATIONS
QuickMenu
HotKey
By default, the Control button has been assigned with the specific function.
Note: To change the preset hot key function, refer to the “Quick Switch” section on
page 19.
To access the hot key function, do the following:
• Move the Control button up ( ) to enter the BlackEqualizer menu.
Move the Control button up/down
( ) to adjust the setting and press the
Control button to confirm.
Select Exit
Input
DisplayPort
HDMI 1
HDMI 2
Adjust Exit
Black Equalizer
10
Select Exit
Input
DisplayPort
HDMI 1
HDMI 2
Adjust Exit
Black Equalizer
10

Gigabyte GS Series Specifications

General

Brand	Gigabyte
Model	GS Series
Category	Monitor
Language	English