Gigabyte GS25F2 - Selecting the Input Source; Operations; Quick Menu

- 8 -
SelectingtheInputSource
1. Move the Control button right ( ) to
enter the Input menu.
2. Move the Control button center ( ) to
select the desired input source. Then
press the Control button to confirm.
OPERATIONS
QuickMenu
HotKey
By default, the Control button has been assigned with the specific function.
Note: To change the preset hot key function, refer to the “Quick Switch” section on
page 16.
To access the hot key function, do the following:
• Move the Control button up ( ) to enter the BlackEqualizer menu.
Move the Control button up/down
( ) to adjust the setting and press the
Control button to confirm.
ExitSelect
Input
HDMI 1
HDMI 2
DisplayPort
ExitAdjust
10
Black Equalizer