Gigabyte H252-3C0 - Intel Optane DCPMM DIMM Population Rule

- 36 - System Hardware Installation
3-6-5 Intel Optane DCPMM DIMM Population Rule
Thermal conditions for DCPMM DIMM support:
• The ambient temperature must be at or below 35°C
• The 3rd Generation Intel® Xeon® Scalable Processors used must have a maximum TDP of 270W
• A maximum of 4 pcs 512G DCPMM may be installed
• You must install one RDIMM into any slot #0 of CPU0 before installing the DCPMM.
• The DCPMM must be installed into the DIMM slot #0 next to the corresponding RDIMM
in slot #0 (e.g. if RDIMM is installed into DIMM slot A0, the DCPMM must be installed into
DIMM slot B0)
CPU
CPU
G0/Optane DCPMM Slot
H0/RDIMM
E0/
Optane DCPMM Slot
F0/RDIMM
B0/
Optane DCPMM Slot
A0/RDIMM
D0/
Optane DCPMM Slot
C0/RDIMM
G0/RDIMM
H0/
Optane DCPMM Slot
E0/RDIMM
F0/
Optane DCPMM Slot
B0/RDIMM
A0/
Optane DCPMM Slot
D0/RDIMM
C0/Optane DCPMM Slot
Configuraon 1
Configuraon 2