Gigabyte H252-3C0 - Page 80

- 80 - BIOS Setup
Parameter
Description
Legacy ADR Mode
Enable/Disable the Legacy ADR Mode.
Options available: Enable/Disable. Default setting is Disable.
Minimum System Memory Size
Minimum system memory size assigned as system memory when
only JEDEC NVDIMMs are present.
Options available: 2GB, 4GB, 6GB, 8GB.
Default setting is 8GB.
ADR Data Save Mode
Species the Data Save Mode for ADR. Batterybacked or Type 01
NVDIMM.
Options available: Disable, Batterybacked DIMMs, NVDIMMs.
Default setting is NVDIMMs.
Erase-ARM NVDIMMs
Enable/Disable Erasing and Arming NVDIMMs.
Options available: Enable/Disable. Default setting is Enable.
Restore NVDIMMs
Enable/Disable Automatic restoring of NVDIMMs.
Options available: Enable/Disable. Default setting is Enable.
Interleave NVDIMMs
Controls if NVDIMMs are interleaved together or not.
Options available: Enable/Disable. Default setting is Enable.
Assert ADR on Reset
Enable/Disable Assert ADR on Reset.
Options available: Enable/Disable. Default setting is Disable.
Assert ADR on S5
Enable/Disable Assert ADR on S5.
Options available: Enable/Disable. Default setting is Disable.
Get Memory Timing
Options available: Enabled/Disabled. Default setting is Disabled.