Gigabyte H252-3C0 - Page 86

BIOS Setup - 86 -
Parameter
Description
CPU P State Control
Press [Enter] to congure advanced items.

SpeedStep (Pstates)
– Conventional Intel SpeedStep Technology switches both voltage
and frequency in tandem between high and low levels in response
to processor load.
– Options available: Enable/Disable. Default setting is Enable.

Activate SST-BF
(Note)
– This option allows SST-BT to be enabled.
– Options available: Enable/Disable. Default setting is Disable.

Congure SST-BF
– This option allows BIOS to congure SST-BF High Priority Cores
so that SW does not have to congure.
– Options available: Enable/Disable. Default setting is Enable.

Turbo Mode
– When this item is enabled, the processor will automatically ramp
up the clock speed of 1-2 of its processing cores to improve its
performance. When this item is disabled, the processor will not
overclock any of its core.
– Options available: Enable/Disable. Default setting is Enable.
(Note) Advanced items prompt when this item is dened.