- 15 - Hardware Installation
Internal I/O Per Node:
1 x COM header
2 x SATA 7-pin connectors
1 x TPM header
1 x BMC SGPIO header
1 x JTAG BMC header
1 x PLD header
1 x Clear CMOS jumper
1 x IPMB connector
1 x Buzzer
Front I/O Per node:
1 x Power button with LED
1 x ID button with LED
1 x Status LED
1 x Reset button
Total:
4 x Power button with LED
4 x ID button with LED
4 x Status LED
4 x Reset button
*1 x CMC Status LED
*1 x CMC Reset button
*Only one CMC Status LED and Reset button per system
Rear Panel I/O Per node:
2 x USB 3.0
1 x VGA
1 x RJ45 MLAN
1 x ID LED
Total:
8 x USB 3.0
4 x VGA
4 x RJ45 MLAN
4 x ID LEDs
*1 x CMC global management port
*Only one CMC global management port per system
To Next Page
Loading...
