Gigabyte H261-NO0 - UPI Configuration

- 78 - BIOS Setup
Parameter
Description
UPI Conguration
UPI General Conguration
Press [Enter] to congure advanced items.

UPI Status
– Press [Enter] to view the UPI status.

Link Frequency Select
– Selects the UPI link frequency.
– Options available: 9.6GB/s, 10.4GB/s, Auto. Default setting is Auto.

SNC
– Enable/Disable Sub NUMA Cluster function.
– Options available: Disable, Enable, Auto. Default setting is Disable.

Stale AtoS
– Enable/Disable Stale A to S directory optimization.
– Options available: Disable, Enable, Auto. Default setting is Disable.

LLC dead line alloc
– Enable/Disable ll dead lines in LLC.
– Options available: Disable, Enable, Auto. Default setting is Auto.