Gigabyte H261-NO0 - Page 82

- 82 - BIOS Setup
Parameter
Description
Intel
®
VT for Directed I/O (VT-d)
(continued)

Post Interrupt
– Enable/Disable VT_D posted interrupt.
– Options available: Enable/Disable. Default setting is Enable.

Coherency Support (Non-Isoch)
– Enable/Disable Non-Isoch VT_D Engine Coherency support.
– Options available: Enable/Disable. Default setting is Enable.
Intel
®
VMD technology
Press [Enter] to congure advanced items.

Intel
®
VMD technology

Intel
®
VMD Conguration
– Enable/Disable the Intel VMD support function.
– Options available: Enable/Disable. Default setting is Disable.

Intel
®
VMD for Non-Hotplug NVMe
(Note)
– Enable/Disable the Intel VMD support for Non-Hotplug NVMe.
– Options available: Enable/Disable. Default setting is Enable.
MCTP
Enable/Disable MCTP (Management Component Transport Protocol).
Options available: Enable/Disable. Default setting is Disable.
(Note) This item appears when Intel® VMD Conguration is set to Enabled.