Gigabyte M27F User Manual

- 29 -
Gaming Monitor User Guide
• KVM ON/OFF: Enable/Disable the KVM button function.
√ Select ON to enable the KVM button function. Once the system
detected USB Type-C input signal, a message box will appear on
the screen.
KVM
Press to switch device.
Press the KVM button or the Control button to switch to USB
Type-C input source.
Note: When the KVM button function is enabled, the KVM ON will be
displayed on the left panel.
√ Select OFF to disable the KVM button function.
Note: When the KVM button function is disabled, the KVM OFF will be
displayed on the left panel.
• KVM Reset: Restore the KVM default settings.
√ HDMI 1 input source is bound with USB Type-B connection.
√ USB Type-C input source is bound with USB Type-C connection.
√ The KVM ON/OFF function is set to ON.

Gigabyte M27F Specifications

General

Color	black
Screen Type	led
Tiltable	yes
Wall Mount	100mm x 100mm
Webcam	no
OS Compatibility	apple ios, windows, not applicable, mac
Screen Size	27 inches
Panel Type	ips
Aspect Ratio	16:9
Resolution	1920 x 1080
Refresh Rate	144hz
Response Time	1 milliseconds
Brightness	300 candela per square meter
Contrast Ratio	1000:1
Synchronization	freesync premium (amd adaptive sync)
HDR	yes
Built-In Speakers	no
Interface Connectors	1 x displayport 1.2, 2 x hdmi
HDMI Ports	2
USB Ports	2 x usb-a 3.0, 1 x usb-c 3.0
USB Type B Ports	1
Display Port Inputs	1
Headphones Output	yes
Width with Stand	24.2 inches
Net Weight without Stand	13 pounds