Gigabyte MS03-6L0 - Page 76

- 76 -
BIOS Setup
Parameter
Description
SATA And RST
Conguration/
SATA Controller And RST
Conguration(continued)

SATA Port 0/1/2/3/4/5
– Enable/Disable Port 0/1/2/3/4/5 device.
– Options available: Enabled, Disabled. Default setting is Enabled.

Hot Plug (for Port 0/1/2/3/4/5)
– Enable/Disable HDD Hot-Plug function.
– Options available: Enabled, Disabled. Default setting is Enabled.

Spin Up Device (for Port 0/1/2/3/4/5)
– On an edge detect from 0 to 1, the PCH starts a COM reset
initialization to the device.
– Options available: Enabled, Disabled. Default setting is Disabled.
(Note) Only appears when HDD sets to RAID Mode.