Gigabyte MS03-6L0 - Page 80

- 80 -
BIOS Setup
Parameter
Description
PCIe Error Enabling
(continued)

Uncorrected Error
(Note)
– Enables and escalates Uncorrectable/Recoverable Errors to error pins.
– Options available: Enable, Disable. Default setting is Enable.

Fatal Error Enable
(Note)
– Enables and escalates Fatal Errors to error pins.
– Options available: Enable, Disable. Default setting is Enable.

Assert NMI on SERR
(Note)
– Enable/Disable BIOS generates a non-maskable interrupt (NMI) and logs
an error when a system error (SERR) occurs.
– Options available: Enabled, Disabled. Default setting is Enabled.

Assert NMI on PERR
(Note)
– Enable/Disable BIOS generates a non-maskable interrupt (NMI) and logs
an error when a processor bus parity error (PERR) occurs.
– Options available: Enabled, Disabled. Default setting is Enabled.
(Note) This item appears when PCIE Error is set to Enable.