BIOS Setup - 112 -
2-3-10-3 PCI/PCI-E Error Enabling
PCI-Ex Error Enable
(Note)
Options available: Yes/No. Default setting is No.
Corrected Error Enable
Options available: Enabled/Disabled. Default setting is Disabled.
Uncorrected Error Enable
Options available: Enabled/Disabled. Default setting is Enabled.
Fatal Error Enable
Options available: Enabled/Disabled. Default setting is Enabled.
Enable SERR propagation
When this item is set to enabled, PCI bus system error (SERR) is generated and is routed to NMI.
Options available: Yes/No. Default setting is Yes.
Enable PERR propagation
When this item is set to Yes, PCI bus parity error (PERR) is generated and is routed to NMI.
Options available: Yes/No. Default setting is Yes.
(Note) Advanced items prompt when this item is set to Yes.
To Next Page
Loading...
