Gigabyte MW50-SV0 - Internal Connectors

- 21 -
Hardware Installation
1-6 Internal Connectors
1) ATX
2) P12V_AUX1
3) PMBUS
4) CPU0_FAN
5) SYS_FAN0 (System Fan)
6) SYS_FAN1 (System Fan)
7) SYS_FAN2 (System Fan)
8) SYS_FAN3 (System Fan)
9) SATA_0_1/SATA_2_3
10) SSATA_0_1/SSATA_2_3
11) SATA4
12) GSATA0/1/2/3
13) SSATA_SGP1
14) SATA_SGP1
15) F_USB3
16) F_USB2
17) COM2
18) F_AUDIO
19) SPDIF_IN
20) SPDIF_OUT
21) TPM
22) FP_1
23) BP_1
24) LAN3_ACT
25) SW_RAID
26) TBT
27) CASE_OPEN
28) BAT
1
2
3
4
5
6
78 9
12
11
10
1314
16
17
18
21
15
25
27
28
23
24
22
19
20
26
Read the following guidelines before connecting external devices:
• First make sure your devices are compliant with the connectors you wish to connect.
• Before installing the devices, be sure to turn off the devices and your computer. Unplug the power
cord from the power outlet to prevent damage to the devices.
• After installing the device and before turning on the computer, make sure the device cable has
been securely attached to the connector on the motherboard.