Gigabyte MW50-SV0 - Page 26

Hardware Installation
- 26 -
17) COM2 (Serial Port Header)
The COM header provides one serial port via an optional COM port cable. For purchasing the optional
COM port cable, please contact the local dealer.
1 2
9 10
PinNo. Denition
1 NDCD-
2 NSIN
3 NSOUT
4 NDTR-
5 GND
6 NDSR-
7 NRTS-
8 NCTS-
9 NRI-
10 No Pin
18) F_AUDIO (Front Panel Audio Header)
 ThefrontpanelaudioheadersupportsIntelHighDenitionaudio(HD)andAC'97audio.Youmayconnect
your chassis front panel audio module to this header. Make sure the wire assignments of the module
connector match the pin assignments of the motherboard header. Incorrect connection between the
module connector and the motherboard header will make the device unable to work or even damage it.
For AC'97 Front Panel Audio:
PinNo. Denition
1 MIC
2 GND
3 MIC Power
4 NC
5 Line Out (R)
6 NC
7 NC
8 No Pin
9 Line Out (L)
10 NC
For HD Front Panel Audio:
PinNo. Denition
1 MIC2
2 GND
3 FP_AUD_DET
4 NC
5 LINE2_R
6 MIC2_JD
7 GND
8 No Pin
9 LINE2_L
10 LINE2_JD
21
109
• The front panel audio header supports HD audio by default. If your chassis provides an AC'97
front panel audio module.