EasyManua.ls Logo

Gigabyte MW50-SV0 - Page 31

Gigabyte MW50-SV0
131 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 31 -
Hardware Installation
28) BAT (Battery)
Thebatteryprovidespowertokeepthevalues(suchasBIOScongurations,date,andtimeinformation)
in the CMOS when the computer is turned off. Replace the battery when the battery voltage drops to a
low level, or the CMOS values may not be accurate or may be lost.
Always turn off your computer and unplug the power cord before replacing the battery.
Replace the battery with an equivalent one. Danger of explosion if the battery is replaced with an incorrect model.
Contact the place of purchase or local dealer if you are not able to replace the battery by yourself or uncertain about the battery
model.
When installing the battery, note the orientation of the positive side (+) and the negative side (-) of the battery (the positive side
should face up).
Used batteries must be handled in accordance with local environmental regulations.
27) CASE_OPEN (Case open intrusion alert header)
Open: Normal operation.
Closed: Active chassis intrustion alert.

Table of Contents

Related product manuals