Gigabyte MW50-SV0 - Page 67

- 67 - BIOS Setup
PORT CONFIGURATION MENU
NIC Conguration
 Press[Enter]forcongurationofadvanceditems.
Blink LEDs (range 0-15 seconds)
 BlinkLEDsforthespeciedduration(upto15seconds).
Press the numberic keys to input the desired value.
PORT CONFIGURATION INFORMATION
UEFI Driver
Display the UEFI driver information.
Adapter PBA
Display the Adapter PBA information.
Chip Type
Display the Chip type.
PCI Device ID
Display the PCI device ID.
Link Status
Display the link status.
MAC Address
Display the Factory MAC address information.
Link Speed
Change link speed duplex for current port.
Options available: AutoNeg/10Mbps Half/10Mbps Half/10Mbps Half/100Mbps Full.
Default setting is AutoNeg.
Wake On LAN
Enable/Disable Wake On LAN feature.
Options available: Enabled/DIsabled. Default setting is Enabled.