- 9 -
43 SPDIF_IN S/PDIF in header
44 F_AUDIO Front audio connector
45 PCI_1 PCI 32/33MHz slot
46 BIOS_PWD Clearing Supervisor Password jumper
47 BIOS_RCVR BIOS recovery jumper
48 PCIE_1 PCI Express x16 slot (Running at x8/Shared
bandwidth with MEZZ_1)
49 PCIE_3 PCI Express x16 slot
50 TPM TPM module connector
51 SPDIF_OUT S/PDIF out header
52 MEZZ_1 Mezzine slot (x4 slot/Proprietary/Running at
x4)
53 PCIE_4 PCI Express x16 slot
54 BAT Battery socket
55 TBT Thunderbolt addin-in card connector
56 CPU0_FAN CPU0 fan connector
CAUTION! If a SATA type hard drive is connected to the motherboard, please ensure the jumper is
closed and set to 2-3 pins (Default setting), in order to reduce any risk of hard disk damage. Please
refer to Page 32 for SATA_DOM jumper setting instruction.
To Next Page
Loading...
