Gigabyte MZ01-CE1 User Manual

Hardware Installation - 18 -
LAN Port
•
Whenremovingthecableconnectedtoabackpanelconnector,rstremovethecablefromyour
device and then remove it from the motherboard.
•
When removing the cable, pull it straight out from the connector. Do not rock it side to side to
prevent an electrical short inside the cable connector.
ID Button/ LED:10/100/1000 LAN Speed LED:
State Description
Yellow On 1 Gbps data rate
Green On 100 Mbps data rate
Off 10 Mbps data rate
State Description
Blue On Systemidenticationisactive.
Off Systemidenticationisdisabled.
10G LAN Link and Speed LED
State Description
Yellow On 10 Gbps data rate
Green On 1 Gbps data rate
Off 100 Mbps data rate
10G LAN Port Active/Link LEDs
10/100/1000 LAN and ID Button LEDs
Link/Activity LED
Speed LED
LAN Port
Link/Activity LED
Speed LED

Gigabyte MZ01-CE1 Specifications

General

Brand	Gigabyte
Model	MZ01-CE1
Category	Motherboard
Language	English